imc 2101 series mar. 01, 2002 page 1 of 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: frontierusa.com insert molded coil? 2101 series a. mechanical drawing: b. electrical specification: part no. turns l min. l nom. l max. q min @ l nom. color 2101-01 1.5 0.045 0.046 0.048 110 brown 2101-02 2.5 0.073 0.081 0.090 136 red 2101-03 3.5 0.106 0.124 0.144 145 orange 2101-04 4.5 0.139 0.168 0.204 120 yellow 2101-05 5.5 0.180 0.224 0.278 125 green 2101-06 6.5 0.221 0.282 0.361 126 blue 2101-07 7.5 0.263 0.339 0.437 126 violet 2101-08 8.5 0.311 0.406 0.531 130 gray 2101-09 9.5 0.355 0.468 0.617 130 white 2101-10 10.5 0.410 0.538 0.707 135 black 2101-11 11.5 0.452 0.590 0.769 140 brown 2101-12 12.5 0.495 0.651 0.855 140 red 2101-13 13.5 0.547 0.717 0.940 145 orange 2101-14 14.5 0.589 0.770 1.007 146 yellow 2101-15 15.5 0.651 0.831 1.061 150 green 2101-16 16.5 0.683 0.866 1.099 150 blue 2101-17 17.5 0.735 0.923 1.159 150 violet 2101-18 18.5 0.788 0.992 1.249 150 gray 2101-19 19.5 0.819 1.021 1.272 95 white 2101-20 20.5 0.887 1.101 1.367 95 black 2101-21 21.5 0.945 1.106 1.425 98 brown 2101-22 22.5 0.996 1.207 1.463 98 red 2101-23 23.5 1.050 1.271 1.539 100 orange c. features: 1. plastic molded. 2. high reliability. 3. low cost. d. measurement: 1. q and l measured with leads connected directly. 2. l min. measured with core halfway out of the top of the form. 3. inductance greater than 0.1uh read at recommended q meter frequency. 4. inductance below 0.1uh calculated from readings taken at 50mhz. e. test equipment: q meter (hp 4342a)
|